- Turning the thermostat back 7 to 10°F for 8 hours a day can save up to 10% a year on heating and cooling
- Sealing drafts is one of the cheapest upgrades
- A clean filter helps your furnace run efficiently
- Ask your utility about energy audits and rebates
Heating is one of the largest household expenses in colder parts of the country. You do not need expensive upgrades to make a difference. Start with the free and low-cost steps below.
Free changes
1. Adjust your thermostat. The U.S. Department of Energy says you can save as much as 10% a year on heating and cooling by turning your thermostat back 7 to 10°F for 8 hours a day, for example while you sleep or are at work.
2. Use the sun. Open curtains on south-facing windows during the day and close all curtains at night.
3. Close vents in rooms you rarely use, but only a few. Closing too many can strain your system.
4. Run ceiling fans clockwise on low to push warm air down from the ceiling.
5. Lower your water heater to about 120°F.

Low-cost upgrades
6. Seal drafts around doors and windows with weatherstripping and caulk. A draft stopper at the bottom of a door costs only a few dollars.
7. Add foam gaskets behind outlet and switch covers on exterior walls.
8. Replace the furnace filter every one to three months.
9. Install a programmable or smart thermostat so temperature changes happen automatically.
10. Insulate exposed hot water pipes.
Bigger savings
11. Get a furnace tune-up. A well-maintained system runs more efficiently. See our pre-winter furnace checklist.
12. Ask your utility company about free or low-cost home energy audits, rebates on insulation and efficient equipment, and budget billing plans that spread costs evenly across the year.
Keep reading: How to keep your pipes from freezing.
