- Replace a dirty filter before the season starts
- A brief dusty smell on first start-up is normal, a lasting burning smell is not
- Test carbon monoxide detectors if you have gas heat
- Book a tune-up early, before the cold-weather rush
The first really cold night of the season is one of the busiest nights of the year for heating companies. Furnaces that have sat idle for months suddenly need to run for hours, and small problems all show up at once.
These seven checks take about 20 minutes and can save you from a cold house and an emergency call.
1. Change the filter
A clogged filter is the most common reason a furnace struggles or shuts itself off. Pull it out and hold it up to the light. If you cannot see light through it, replace it. Write the size printed on the frame on your phone so you buy the right one next time.
Most filters need replacing every one to three months, more often if you have pets or allergies.
2. Test the thermostat
Switch the thermostat to heat and set it a few degrees above the current room temperature. You should hear the system start within a few minutes and feel warm air soon after. Replace the batteries if your thermostat uses them.

3. Expect a dusty smell, but only briefly
A slight burning-dust smell the first time the heat runs is normal. Dust that settled on the burners over the summer is burning off. If the smell lasts more than an hour, or smells like burning plastic or gas, turn the system off and call a professional.
If you ever smell gas (a rotten-egg smell), leave the house and call your gas utility from outside.
4. Open the vents and returns
Walk through every room and make sure supply vents and return grilles are open and not blocked by furniture, curtains or rugs. Blocked returns make the furnace work harder and can cause it to overheat.
5. Test carbon monoxide detectors
If you have gas or oil heat, working carbon monoxide detectors are essential. Press the test button on each one and replace the batteries. Most detectors also have an expiration date printed on the back.
6. Clear the area around the furnace
Over the summer, utility rooms often fill up with boxes and paint cans. Keep anything flammable well away from the furnace and the water heater.
7. Book a tune-up before the rush
A professional tune-up checks the burners, the heat exchanger, electrical connections, the blower and airflow. Booking early in the season usually means faster scheduling and less waiting if something needs repair.
Call a pro now if you notice
- The furnace turns on and off every few minutes
- Some rooms stay cold while others get warm
- Loud banging, squealing or rattling
- A yellow or flickering burner flame instead of a steady blue one
- Your energy bill jumps without any change in how you use it
Heating, cooling, plumbing & electrical help
- Free estimates on new systems and replacements
- Seasonal specials on HVAC inspections and service
- Preferred Partner Plan with priority service and member discounts (program terms apply)
Offer details are set by the advertiser and may change. Service area and availability apply.
Frequently asked questions
How often should a furnace be serviced?
Once a year is the usual recommendation, ideally before heating season begins.
How long does a furnace last?
Many gas furnaces last around 15 to 20 years with regular maintenance. If yours is older and needs frequent repairs, it is worth getting a replacement estimate.
